Combine Solicitation – 65– CIRRUS HD-OCT 5000 w/ AngioPlex OCT Angiography Version 9.5 Opthalmology Equipment Department of Veterans Affairs Medical Center

Combine Solicitation - 65-- CIRRUS HD-OCT 5000 w/ AngioPlex OCT Angiography Version 9.5 Opthalmology Equipment Department of Veterans Affairs Medical Center

Notice Type: Combine Solicitation

Posted Date: 24-JUL-17

Office Address: Department of Veterans Affairs;Network Contracting Office 2;76 Veterans Avenue;Bath NY 14810

Subject: 65-- CIRRUS HD-OCT 5000 w/ AngioPlex OCT Angiography Version 9.5 Opthalmology Equipment Department of Veterans Affairs Medical Center

Classification Code: 65 - Medical, dental & veterinary equipment & supplies

Solicitation Number: VA24217Q0928

Contact: Edward [email protected] mailto:[email protected]

Setaside: Veteran-Owned Small BusinessVeteran-Owned Small Business

Place of Performance (address): Department of Veterans Affairs;VA Medical Center;800 Irving Avenue;Syracuse, NY

Place of Performance (zipcode): 13210

Place of Performance Country: USA

Description: Department of Veterans Affairs

Bath VAMC

Department of Veterans Affairs Medical Center

COMBINED SYNOPSIS/SOLICITATION*Zeiss Cirrus HD-OCT Model 5000

DEPT OF VETERANS AFFAIRS MEDICAL CENTER Syracuse, NY

*This combined synopsis/solicitation is being issued as a total Service Disabled Veteran Owned Small Business / Veteran Owned Small Business (SDVOSB / VOSB) set-aside

(i) This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format in FAR Subpart 12.6 and FAR Subpart 13.5 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.

(ii) This solicitation is issued as a request for quote (RFQ). Request for Quote will be submitted through fedbizopps.gov on RFQ reference number VA242-17-Q-0928.

(iii) This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-83.

(iv) This procurement is being issued as a small business set-aside. The North American Industry Classification System (NAICS) code is 334510 Electromedical and Electrotherapeutic Apparatus Manufacturing with a small business size standard of 1250 employees.

(v) The Contractor shall provide all parts and labor necessary to deliver a ZEISS CIRRUS HD-OCT (MODEL 5000). The requested system is requested to be brand name only. Due to the highly specialized nature of OCT procedures, only Zeiss products as described below will be considered. All products shall be delivered in new and unused/unopened condition.

(vi) Description of requirement: See last page (attachment)

Deliver to: Department of Veterans Affairs

VA Medical Center

800 Irving Avenue

Syracuse, New York 13210

(vii) EVALUATION: Quotes will be evaluated based upon best value to the Government. Technical acceptability is based upon the ability to meet the required specifications, delivery lead time. Pricing will also be evaluated.

Vendor shall be an Original Equipment Manufacturer (OEM) authorized dealer, authorized distributor or authorized reseller for the proposed equipment/system such that OEM warranty and service are provided and maintained by the OEM. All software licensing, warranty and service associated with the equipment/system shall be in accordance with the OEM terms and conditions.

Contract Administration: All contract administration matters will be handled by the following individual:

Edward Lyke, Contracting Officer

(viii) CONTRACTOR REMITTANCE ADDRESS: All payments by the Government to the contractor will be made in accordance with 52.232-34, Payment by Electronic Funds Transfer Other Than System For Award Management,

(ix) INVOICES: Invoices shall be submitted upon final installation of goods

(x) GOVERNMENT INVOICE ADDRESS: All Invoices from the contractor shall be submitted electronically in accordance with VAAR Clause 852.232-72 Electronic Submission of Payment Requests.

Tungsten Network

http://www.tungsten-network.com/us/en/veterans-affairs

(xi) The clause at FAR 52.212-4, Contract Terms and Conditions-Commercial Items, applies to this acquisition.

(xii) The clause at FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Order- Commercial items, applies to this acquisition.

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS COMMERCIAL ITEMS (Nov 2015)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)

(2) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(3) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Pub. Laws 108-77, 108-78).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[] (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 253g and 10 U.S.C. 2402).

[] (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C 3509).

[] (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

[X] (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2015) (Pub. L. 109-282) (31 U.S.C. 6101 note).

[] (5) 52.204-11, American Recovery and Reinvestment Act-Reporting Requirements (JUL 2010) (Pub. L. 111-5).

[] (6) 52.204-14, Service Contract Reporting Requirements (JAN 2014) (Pub. L. 111-117, section 743 of Div. C).

[] (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (JAN 2014) (Pub. L. 111-117, section 743 of Div. C).

[X] (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Aug 2013) (31 U.S.C. 6101 note).

[] (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Jul 2013) (41 U.S.C. 2313).

[] (11) 52.219-3, Notice of HUBZone Set-Aside or Sole Source Award (NOV 2011) (15 U.S.C. 657a).

() (ii) Alternate I (Nov 2011) of 52.219-3.

[] (12) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

[] (13) [Reserved]

[] (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644).

[] (ii) Alternate I (NOV 2011).

[] (iii) Alternate II (NOV 2011).

[] (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

[] (ii) Alternate I (Oct 1995) of 52.219-7.

[] (iii) Alternate II (Mar 2004) of 52.219-7.

[] (16) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)).

[] (17)(i) 52.219-9, Small Business Subcontracting Plan (Oct 2015) (15 U.S.C. 637(d)(4)).

[] (ii) Alternate I (Oct 2001) of 52.219-9.

[] (iii) Alternate II (Oct 2001) of 52.219-9.

[] (iv) Alternate III (JUL 2010) of 52.219-9.

[] (18) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)).

[] (19) 52.219-14, Limitations on Subcontracting (NOV 2011) (15 U.S.C. 637(a)(14)).

[] (20) 52.219-16, Liquidated Damages Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

[X] (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C. 657f).

[] (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C 632(a)(2)).

[] (23) 52.219-29, Notice of Set-Aside for Economically Disadvantaged Women-Owned Small Business (EDWOSB) Concerns (Jul 2013) (15 U.S.C. 637(m)).

[] (24) 52.219-30, Notice of Set-Aside for Women-Owned Small Business (WOSB) Concerns Eligible Under the WOSB Program (Jul 2013) (15 U.S.C. 637(m)).

[X] (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

[X] (26) 52.222-19, Child Labor Cooperation with Authorities and Remedies (JAN 2014) (E.O. 13126).

[] (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

[] (28) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246).

[] (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

[] (30) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

[] (31) 52.222-37, Employment Reports on Veterans (Oct 2015) (38 U.S.C. 4212).

[] (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496).

(X) (33) (i) 52.222-50, Combat Trafficking in Persons (Mar 2015) (22 U.S.C chapter 78 and E.O. 13627).

() (ii) Alternate I (Mar 2015) of 52.222-50, (22 U.S.C. chapter 78 and E.O. 13627).

[] (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

[] (35)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C.6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

[] (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

( ) (36) (i) 52.223-13, Acquisition of EPEAT Registered Imaging Equipment (Jun 2014) (E.O. s 13423 and 13514

( ) (ii) Alternate I (Oct 2015) of 52.223-13.

( ) (37) (i) 52.223-14, Acquisition of EPEAT Registered Television (Jun 2014) (E.O. s 13423 and 13514).

( ) (ii) Alternate I (Jun 2014) of 52.223-14

[] (38) 52.223-15, Energy Efficiency in Energy-Consuming Products (DEC 2007)(42 U.S.C. 8259b).

[] (39)(i) 52.223-16, Acquisition of EPEAT Registered Personal Computer Products (Oct 2015) (E.O. s 13423 and 13514).

[] (ii) Alternate I (Jun 2014) of 52.223-16.

[X] (40) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513).

[] (41) 52.225-1, Buy American Act Supplies (May 2014) (41 U.S.C. chapter 83).

[] (42)(i) 52.225-3, Buy American Act Free Trade Agreements Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43).

[] (ii) Alternate I (May 2014) of 52.225-3.

[] (iii) Alternate II (May 2014) of 52.225-3.

[] (iv) Alternate III (May 2014) of 52.225-3.

[X] (43) 52.225-5, Trade Agreements (Nov 2013) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

[X] (44) 52.225-13, Restrictions on Certain Foreign Purchases (JUN 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

[] (45) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

[] (46) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

[] (47) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

[] (48) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)).

[] (49) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)).

[] (50) 52.232-33, Payment by Electronic Funds Transfer System for Award Management (Jul 2013) (31 U.S.C. 3332).

[X] (51) 52.232-34, Payment by Electronic Funds Transfer Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).

[] (52) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

[] (53) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

[] (54)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).

[] (ii) Alternate I (Apr 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[] (1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495).

[] (2) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67.).

[] (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

( ) (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards Price Adjustment (Multiple Year and Option Contracts) (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

[] (5) 52.222-44, Fair Labor Standards Act and Service Contract Act Price Adjustment (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

[] (6) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment Requirements (May 2014) (41 U.S.C. chapter 67).

[] (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. 351, chapter 67).

[] (8) 52.222-55, Minimum Wages Under Executive Order (Dec 2014) (E.O. 13658).

[] (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014)(42 U.S.C. 1792).

[] (10) 52.237-11, Accepting and Dispensing of $1 Coin (SEP 2008) (31 U.S.C. 5112(p)(1)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C 3509).

(ii) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(iii) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17.

(iv) 52.222-21, Prohibition of Segregated Facilities (Apr 2015)

(v) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246).

(vi) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

(vii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(ix) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(x) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67).

(xi (A) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627).

(B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 E. O. 13627).

(xii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment Requirements "(May2014)" (41 U.S.C. chapter 67).

(xiii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014)(41 U.S.C. 351, chapter 67).

(xiv) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).

(XV) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2014) (E. O. 13658).

(xvi) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xvii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014)(42 U. S. C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xviii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of Clause)

The following additional contract requirement(s) or terms and conditions apply to this acquisition and are consistent with customary commercial practices:

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://www.acq.osd.mil/dpap/dars/dfars/index.htm

52.204-13 System for Award Management Maintenance

52.209-10 Prohibition on Contracting with Inverted Domestic Corporations

52.222-36 Affirmative Action for Workers with Disabilities

52.225-5 Trade Agreements

52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran--Representation and Certifications.

52.232-33 Payment by Electronic Funds Transfer-System for Award Management

52.232-39 Unenforceability of Unauthorized Obligations

52.233-3 Protest After Award

52.233-4 Applicable Law for Breach of Contract Claim

52.247-34 FOB Destination

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): http://www.acq.osd.mil/dpap/dars/dfars/index.htm

52.204-7 System for Award Management

52.209-2 Prohibition on Contracting with Inverted Domestic Corporations-Representation

THE FOLLOWING CLAUSES AND PROVISIONS ARE INCLUDED BY FULL TEXT:

52.225-6 -- Trade Agreements Certificate. (Jan 2005)

(a) The offeror certifies that each end product, except those listed in paragraph (b) of this provision is a U.S.-made or designated country end product, as defined in the clause of this solicitation entitled Trade Agreements.

(b) The offeror shall list as other end products those supplies that are not U.S.-made or designated country end products.

Other End Products [List as necessary]

(c) The Government will evaluate offers in accordance with the policies and procedures of Part 25 of the Federal Acquisition Regulation. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American Act. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for those products are insufficient to fulfill the requirements of this solicitation.

(End of Provision)

852.203-70 COMMERCIAL ADVERTISING

The bidder or offeror agrees that if a contract is awarded to him/her, as a result of this solicitation, he/she will not advertise the award of the contract in his/her commercial advertising in such a manner as to state or imply that the Department of Veterans Affairs endorses a product, project or commercial line of endeavor.

(End of Clause)

852.211-70 SERVICE DATA MANUALS (NOV 1984)

(a) The successful bidder will supply operation/maintenance (service data) manuals with each piece of equipment in the quantity specified in the solicitation and resulting purchase order. As a minimum, the manual(s) shall be bound and equivalent to the manual(s) provided the manufacturer's designated field service representative as well as comply with all the requirements in paragraphs (b) through (i) of this clause. Sections, headings and section sequence identified in (b) through (i) of this clause are typical and may vary between manufacturers. Variances in the sections, headings and section sequence, however, do not relieve the manufacturer of his/her responsibility in supplying the technical data called for therein.

(b) Title Page and Front Matter. The title page shall include the equipment nomenclature, model number, effective date of the manual and the manufacturer's name and address. If the manual applies to a particular version of the equipment only, the title page shall also list that equipment's serial number. Front matter shall consist of the Table of Contents, List of Tables, List of Illustrations and a frontispiece (photograph or line drawing) depicting the equipment.

(c) Section I, General Description. This section shall provide a generalized description of the equipment or devices and shall describe its purpose or intended use. Included in this section will be a table listing all pertinent equipment specifications, power requirements, environmental limitations and physical dimensions.

(d) Section II, Installation. Section II shall provide pertinent installation information. It shall list all input and output connectors using applicable reference designators and functional names as they appear on the equipment. Included in this listing will be a brief description of the function of each connector along with the connector type. Instructions shall be provided as to the recommended method of repacking the equipment for shipment (packing material, labeling, etc.).

(e) Section III, Operation. Section III will fully describe the operation of the equipment and shall include a listing of each control with a brief description of its function and step-by-step procedures for each operating mode. Procedures will use the control(s) nomenclature as it appears on the equipment and will be keyed to one or more illustrations of the equipment. Operating procedures will include any preoperational checks, calibration adjustments and operation tests. Notes, cautions and warnings shall be set off from the text body so they may easily be recognizable and will draw the attention of the reader. Illustrations should be used wherever possible depicting equipment connections for test, calibration, patient monitoring and measurements. For large, complex and/or highly versatile equipment capable of many operating modes and in other instances where the Operation Section is quite large, operational information may be bound separately in the form of an Operators Manual. The providing of a separate Operators manual does not relieve the supplier of his responsibility for providing the minimum acceptable maintenance data specified herein. When applicable, flow charts and narrative descriptions of software shall be provided. If programming is either built-in and/or user modifiable, a complete software listing shall be supplied. Equipment items with software packages shall also include diagnostic routines and sample outputs. Submission information shall be given in the Maintenance Section to identify equipment malfunctions that are software related.

(f) Section IV, Principles of Operation. This section shall describe in narrative form the principles of operation of the equipment. Circuitry shall be discussed in sufficient detail to be understood by technicians and engineers who possess a working knowledge of electronics and a general familiarity with the overall application of the devices. The circuit descriptions should start at the overall equipment level and proceed to more detailed circuit descriptions. The overall description shall be keyed to a functional block diagram of the equipment. Circuit descriptions shall be keyed to schematic diagrams discussed in paragraph (i) below. It is recommended that for complex or special circuits, simplified schematics should be included in this section.

(g) Section V, Maintenance. The maintenance section shall contain a list of recommended test equipment, special tools, preventive maintenance instructions and corrective information. The list of test equipment shall be that recommended by the manufacturer and shall be designated by manufacturer and model number. Special tools are those items not commercially available or those that are designed specifically for the equipment being supplied. Sufficient data will be provided to enable their purchase by the Department of Veterans Affairs. Preventive maintenance instructions shall consist of those recommended by the manufacturer to preclude unnecessary failures. Procedures and the recommended frequency of performance shall be included for visual inspection, cleaning, lubricating, mechanical adjustments and circuit calibration. Corrective maintenance shall consist of the data necessary to troubleshoot and rectify a problem and shall include procedures for realigning and testing the equipment. Troubleshooting shall include either a list of test points with the applicable voltage levels or waveforms that would be present under a certain prescribed set of conditions, a troubleshooting chart listing the symptom, probable cause and remedy, or a narrative containing sufficient data to enable a test technician or electronics engineer to determine and locate the probable cause of malfunction. Data shall also be provided describing the preferred method of repairing or replacing discrete components mounted on printed circuit boards or located in areas where special steps must be followed to disassemble the equipment. Procedures shall be included to realign and test the equipment at the completion of repairs and to restore it to its original operating condition. These procedures shall be supported by the necessary waveforms and voltage levels, and data for selecting matched components. Diagrams, either photographic or line, shall show the location of printed circuit board mounted components.

(h) Section VI, Replacement Parts List. The replacement parts list shall list, in alphanumeric order, all electrical/electronic, mechanical and pneumatic components, their description, value and tolerance, true manufacturer and manufacturers' part number.

(i) Section VII, Drawings. Wiring and schematic diagrams shall be included. The drawings will depict the circuitry using standard symbols and shall include the reference designations and component values or type designators. Drawings shall be clear and legible and shall not be engineering or productions sketches.

852.219-11 VA Notice of Total Veteran-Owned Small Business Set-Aside.

As prescribed in subpart 819.7009, insert the following clause:

VA NOTICE OF TOTAL VETERAN-OWNED SMALL BUSINESS SET-ASIDE (DEC 2009)

(a) Definition. For the Department of Veterans Affairs, Veteran-owned small business concern

(1) Means a small business concern

(i) Not less than 51 percent of which is owned by one or more veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans;

(ii) The management and daily business operations of which are controlled by one or more veterans;

(iii) The business meets Federal small business size standards for the applicable North American Industry Classification System (NAICS) code identified in the solicitation document; and

(iv) The business has been verified for ownership and control and is so listed in the Vendor Information Pages database, (http://www.VetBiz.gov).

(2) Veteran is defined in 38 U.S.C. 101(2).

(b) General. (1) Offers are solicited only from veteran-owned small business concerns. All service-disabled veteran-owned small businesses are also determined to be veteran owned small businesses if they meet the criteria identified in paragraph (a)(1) of this section. Offers received from concerns that are not veteran-owned small business concerns shall not be considered.

(2) Any award resulting from this solicitation shall be made to a veteran-owned small business concern.

(c) Agreement. A veteran-owned small business concern agrees that in the performance of the contract, in the case of a contract for

(1) Services (except construction), at least 50 percent of the cost of personnel for contract performance will be spent for employees of the concern or employees of other eligible veteran-owned small business concerns;

(2) Supplies (other than acquisition from a non-manufacturer of the supplies), at least 50 percent of the cost of manufacturing, excluding the cost of materials, will be performed by the concern or other eligible veteran-owned small business concerns;

(3) General construction, at least 15 percent of the cost of the contract performance incurred for personnel will be spent on the concern s employees or the employees of other eligible veteran-owned small business concerns; or

(4) Construction by special trade contractors, at least 25 percent of the cost of the contract performance incurred for personnel will be spent on the concern s employees or the employees of other eligible veteran-owned small business concerns.

(d) A joint venture may be considered a veteran-owned small business concern if:

(1) At least one member of the joint venture is a veteran-owned small business concern, and makes the following representations: That it is a veteran-owned small business concern, and that it is a small business concern under the NAICS code assigned to the procurement;

(2) Each other concern is small under the size standard corresponding to the NAICS code assigned to the procurement;

(3) The joint venture meets the requirements of paragraph 7 of the explanation of Affiliates in 19.101 of the Federal Acquisition Regulation; and

(4) The joint venture meets the requirements of 13 CFR 125.15(b), except that the principal company may be a veteran-owned small business concern or a service-disabled veteran-owned small business concern.

(e) Any veteran-owned small business concern (non-manufacturer) must meet the requirements in 19.102(f) of the Federal Acquisition Regulation to receive a benefit under this program.

(End of Clause)

852.233-70 Protest content/alternative dispute resolution.

PROTEST CONTENT/ALTERNATIVE DISPUTE RESOLUTION (JAN 2008)

(a) Any protest filed by an interested party shall:

(1) Include the name, address, fax number, and telephone number of the protester;

(2) Identify the solicitation and/or contract number;

(3) Include an original signed by the protester or the protester s representative and at least one copy;

(4) Set forth a detailed statement of the legal and factual grounds of the protest, including a description of resulting prejudice to the protester, and provide copies of relevant documents;

(5) Specifically request a ruling of the individual upon whom the protest is served;

(6) State the form of relief requested; and

(7) Provide all information establishing the timeliness of the protest.

(b) Failure to comply with the above may result in dismissal of the protest without further consideration.

(c) Bidders/offerors and contracting officers are encouraged to use alternative dispute resolution (ADR) procedures to resolve protests at any stage in the protest process. If ADR is used, the Department of Veterans Affairs will not furnish any documentation in an ADR proceeding beyond what is allowed by the Federal Acquisition Regulation.

(End of Provision)

852.233-71 Alternate protest procedure.

ALTERNATE PROTEST PROCEDURE (JAN 1998)

As an alternative to filing a protest with the contracting officer, an interested party may file a protest with the Deputy Assistant Secretary for Acquisition and Materiel Management, Acquisition Administration Team, Department of Veterans Affairs, 810 Vermont Avenue, NW., Washington, DC 20420, or for solicitations issued by the Office of Construction and Facilities Management, the Director, Office of Construction and Facilities Management, 810 Vermont Avenue, NW., Washington, DC 20420. The protest will not be considered if the interested party has a protest on the same or similar issues pending with the contracting officer.

(End of Provision)

852.246-70 Guarantee.

GUARANTEE (JAN 2008)

The contractor guarantees the equipment against defective material, workmanship and performance for a period in accordance with the manufacturer s guarantee or one (1) year, whichever is greater, said guarantee to run from date of acceptance of the equipment by the Government. The contractor agrees to furnish, without cost to the Government, replacement of all parts and material that are found to be defective during the guarantee period. Replacement of material and parts will be furnished to the Government at the point of installation, if installation is within the continental United States, or f.o.b. the continental U.S. port to be designated by the contracting officer if installation is outside of the continental United States. Cost of installation of replacement material and parts shall be borne by the contractor.2

(End of Clause)

852.246-71 Inspection.

As prescribed in 846.302-71(a), insert the following clause:

INSPECTION (JAN 2008)

Rejected goods will be held subject to contractors order for not more than 15 days, after which the rejected merchandise will be returned to the contractor s address at his/her risk and expense. Expenses incident to the examination and testing of materials or supplies that have been rejected will be charged to the contractor s account.

(End of Clause)

(xiii) Instructions to Offerors: Quote packages must include the following or responses will be considered non-responsive:

Specification sheets, product literature, and brochures that fully describe the product being offered

Warranty Provisions

Delivery Lead Time

Pricing

(xiv) N/A

(xv) Quotes are required to be received NO LATER THAN 4:00 PM EST, Friday, July 28, 2017. Quotes and supporting documentation must be emailed to Edward (Pete) Lyke at [email protected].

Attachment

ZEISS OS | CIRRUS HD-OCT (Model 5000) with AngioPlex OCT Angiography Version 9.5. Includes GCGPA, Smart HD Scans, FastTrac, Adv RPE, GCA, Ant Seg Basic

****INCLUDED WITH THE PURCHASE OF A CIRRUS 5000 IS:

266002-1157-764 - PREMIER ANTERIOR SEGMENT**

**TECHNICAL SPECIFICATIONS**

Has the capability to have the ability to capture and provide OCT Angiography: This capability for OCT Angiography is provided by a 1 single OCT scan that allows for visualization of both micro vascular and structural information in a noninvasive dye free scan by the OCT.

Has the ability to import and integrate the Cirrus Model HD OCT 4000 raw data. The raw data must be interchangeable between the Cirrus 4000 and Cirrus 5000 unit (or new unit being procured).

The unit must have exact Macular Scan Pattern of 512x128 for retina scan with exact scanning speed at 27,000 A-scans a second within a 6mmx6mm. Must be able to provide on Company Literature

The unit must have exact scan pattern of 200x200 in a 6mmx6mm cube for Glaucoma Scan with exact scanning speed at 27,000 A-scans a second. The scan pattern must be able to capture and provide RNFL, ONH, Neuro Retinal Rim Tissue, and 3-D Cube capabilities all in one scan

Scanning speeds: Scan at exactly 27,000 A-scans/sec, as well as the ability to

scan at 68,000 A-scans/sec

Unit must be able to provide a report for Ganglion Cell Analysis that is derived from a scan must be comprised of 6mmx6mm cube scan with a minimum by 200x200 line scan pattern with no more than 30 microns between each slice.

Minimum Pupil Requirements must be 2.0mm or less.

Unit must utilize an LSO Fundus Camera (Line Scanning Laser Ophthalmoscope).

The unit must Automatically Track to Prior Scan: The unit must be able to do this without technician needing to align to prior scan.

Anterior Segment scan that is at minimal 15.5 mm in length x 5.8 mm in depth, which is the full view of the Anterior Chamber. Must be able to provide on Company Literature.

Global Pachymetry report that is comprised of minimum of 24 radial scans and must be at a minimum 9mm in length.

The unit must be a 90 degree configuration, so that the tech (operator) must sit to the side (90 degrees)

OCT Imaging:

Methodology - Spectral domain OCT

Optical source - Superluminescent diode (SLD), 840 nm

Scan speed - 27,000 A-scans per second or 68,000 A-scans per second*

*All existing scan patterns in version 6.5 software will run at 27,000 A-scans per second, which is the same scan speed as the CIRRUS 4000.

**All patient data from the Cirrus 4000 instrument can be transferred into the Cirrus 5000 seamlessly and used immediately for Guided Progression Analysis or any other Cirrus analytical program**

A-scan depth - 2.0mm (in tissue), 1024 points

Axial resolution - 5 um (in tissue)

Transverse resolution - 15 um (in tissue)

Cube scan pattern - 512 x 126 with over >67 million data ports and 47um spacing between lines

Cube scan pattern - 200 x 200 with over >40 million data ports and 30um spacing between lines

Fundus Imaging:

Methodology - Line scanning ophthalmoscope (LSO)

Live fundus image - during alignment and during OCT scan

Optical source - Superluminescent diode (SLD), 750nm

Field of view - 36 degrees Wx 30 degrees H

Frame rate - >20 Hz

Transverse resolution - 25 um (in tissue)

Iris Imaging:

Methodology - CCD Camera

Resolution - 1280 x 1024

Live iris image - During alignment

Electrical and Physical:

Weight - 80 lbs.

Dimensions of instrument - 26L x 18Wx 21H (in)

Dimensions of table - 39L X 22W(in)

Fixation:

Internal fixation focus adjustment - -20D to +20D (diopters)

Electrical rating (115V) - Single Phase, 100-120V~systems: 50/60Hz, 5A

Electrical rating (230V) - Single Phase, 200-240V~systems: 50/60Hz, 2.5A

Internal Computer:

Operating system/processor - Windows 7, i& Intel processor

Memory:

Hard drive/internal storage - >=750 GB, > 80,000 scans

Display - Integrated 19" color flat panel display

USB ports - 6 ports

Link/URL: https://www.fbo.gov/spg/VA/BaVAMC/VAMCCO80220/VA24217Q0928/listing.html