Fact Sheet – General Aviation Safety

WASHINGTON, July 26 -- The U.S. Department of Transportation's Federal Aviation Administration issued the following fact sheet:

The Federal Aviation Administration (FAA) and industry are working on a number of key initiatives to improve general aviation (GA) safety: the GA Joint Steering Committee (GAJSC), Equip 2020 for ADS-B Out, and the Fly Safe outreach campaign on Loss of Control.

The United States has the largest and most diverse GA community in the world, with more than 220,000 aircraft, including amateur-built aircraft, rotorcraft, balloons, and highly sophisticated turbojets. Reducing GA fatalities is a top priority for the FAA and the FAA's goal is to reduce the GA fatal accident rate by 10 percent over a 10-year period (2009-2018). Inflight Loss of control - mainly stalls - accounts for the largest number of GA fatal accidents. Last year, 413 people died in 219 general aviation accidents.

The FAA and industry are focused on reducing general aviation accidents by using a primarily non-regulatory, proactive, and data-driven strategy to achieve results, which is similar to the strategy the FAA uses in commercial aviation.

Reducing Risk

The FAA and industry are working together to use data to identify risk, pinpoint trends through root cause analysis, and develop safety strategies. The FAA and the GA community carry out this work through the GAJSC.

Formed in the mid-1990s, the GAJSC recently has renewed its efforts to combat GA fatal accidents. The government and industry group uses the same approach as the Commercial Aviation Safety Team (CAST). It uses a data-driven, consensus-based approach to analyze safety data to develop specific interventions that will mitigate the root causes of accidents. Recent accomplishments include more than 39 safety enhancements, (such as training, procedures, and technology) to address loss of control. Examples include a streamlined policy for angle of attack (AOA) system approvals and outreach to the GA community on loss of control topics. Since power-plant system and component failures is the third leading fatal GA accident category, the committee analyzed fatal GA accidents involving total or partial engine power loss. It has approved and implemented 10 safety enhancements to improve engine technology, help the pilot with decision making for post-engine failure, and improve the resources, education and training available to mechanics.

The GAJSC combines the expertise of many key decision makers across different parts of the FAA, several government agencies, and stakeholder groups. The other federal agencies are the National Aeronautics and Space Administration and the National Transportation Safety Board, which participates as an observer. Industry participants include the Aircraft Owners and Pilots Association, Experimental Aircraft Association, General Aviation Manufacturers Association, Light Aircraft Manufacturers Association, National Business Aviation Association, National Air Transportation Association, National Association of Flight Instructors, Society of Aviation and Flight Educators, and the aviation insurance industry. The European Aviation Safety Agency (EASA) also participates as an observer.

Other achievements include several web-based resource guides, information on flying and medications, and overall GA community coordination on Loss of Control and engine issue topics. Resources include targeted themes and articles in the FAA Safety Briefing magazine.

The GA community and the FAA are moving toward using de-identified GA operations data in the Aviation Safety Information Analysis and Sharing (ASIAS) program to help identify risks before they become accidents. In March of 2014 the FAA announced the start of a one-year project to illustrate the value, capabilities, and benefits of the ASIAS program for the GA community. The project explored potential new information sources such as General Aviation Flight Data Monitoring, voluntary safety reports, manufacturer reports, and information collected from avionics and using new common technologies such as iOS and Android personal electronic devices. This project has led to a broader expansion of GA in ASIAS. Tools are now available to the GA community to help explore and understand their own flight data and look for potential risks. Through this program, the FAA does not have access to any individual pilot's data as the system is hosted by a third party. The de-identified aggregate data is used by the GA community through ASIAS to identify trends and look for system risks that may need to be mitigated. Data from these programs will be used for GA JSC initiatives and research conducted by the GA community. The GAJSC is working with the community to incorporate their data into ASIAS so that it may be used to identify risk.

New Technology

The FAA's program is comprised of innovative technologies and procedures to make flying safer, greener, and more efficient. In March 2015, the FAA achieved a major milestone by completing one of the largest automation changeovers in the history of the agency. We completed our new high altitude air traffic control system, known as En Route Automation Modernization . This system will accommodate new technologies, giving the U.S. a more powerful air traffic system.

The FAA is working with manufacturers to define equipage requirements and support air traffic modernization by streamlining the certification and installation of new technologies, such as Automatic Dependent Surveillance-Broadcast (ADS-B). It is a foundational element of modernization and transforms aircraft surveillance using satellite-based positioning.

ADS-B enhances GA pilots' awareness of other traffic and improves safety in areas that radar cannot reach, such as Alaska and the Gulf of Mexico. Pilots flying properly equipped aircraft can see graphical weather information on cockpit displays, where they are in relation to nearby aircraft, and flight information such as temporary flight restrictions.

The full benefits of ADS-B can only be realized if all of the planes that fly in controlled airspace are equipped. The FAA has set January 1, 2020, as the deadline to equip for ADS-B Out in controlled airspace. On June 6, 2016 DOT and the FAA announced a $500 rebate incentive for GA aircraft owners who equip their aircraft with required avionics technology. The rebates will be available this fall.

Airman Testing Standards and Training

In collaboration with a diverse group of aviation training community experts, the FAA has updated key elements of the airman certification system to include an enhanced focus on risk management. The FAA has replaced the Practical Test Standards (PTS) for the Private Pilot certificate in the airplane category and the Instrument Rating (also in the airplane category) with the corresponding Airman Certification Standards (ACS).

The ACS improves the PTS by adding task-specific knowledge and risk management elements to each PTS Area of Operation and Task. By integrating knowledge and risk management requirements with skill tasks, the ACS offers a comprehensive presentation of the standards for what an applicant needs to know, consider, and do in order to pass both the knowledge and practical tests for a certificate or rating. This format helps applicants, instructors, evaluators, and other stakeholders understand what the FAA expects in each phase of the certification process, from the FAA knowledge exam to the practical test. It also helps everyone understand how knowledge, risk management, and skill work together for safe operation in the NAS.

Aeronautical Data

Last April, the FAA launched the Got Data? External Data Access Initiative to give the private sector better access the FAA's aeronautical data and spur innovation. The goal is to help industry be in a position to create innovative products and technologies that improve safety and efficiency. The initiative includes data such as airports, navigation aids, fixes, obstacles, holding, approaches, and Temporary Flight Restriction information. Based on stakeholder feedback, the FAA is delivering new features such as the Data Innovation Center, geofenced aeronautical chart product data in consumable formats, and automated digital product downloads. The FAA has also expanded the digital Terminal Procedures Publication, Coded Instrument Flight Procedures, the 8620-2 for all fixes, and added new symbology to charts.

Aircraft Design

On December 16, 2016 the FAA issued a final rule that overhauls the airworthiness standards for small general aviation airplanes. The innovative rule will reduce the time it takes to move safety enhancing technologies for small airplanes into the marketplace and will also reduce costs for the aviation industry. It's a model of what can be accomplished for American competitiveness when government and industry work together and demonstrates that we can simultaneously enhance safety and reduce burdens on industry.

The new Part 23 rule establishes performance-based standards for airplanes that weigh less than 19,000 pounds with 19 or fewer seats and recognizes consensus-based compliance methods for specific designs and technologies. It also adds new certification standards to address general aviation loss of control accidents and in-flight icing conditions.

The rule also promotes regulatory harmonization among the FAA's foreign partners, including (EASA), Transport Canada Civil Aviation, and Brazil's Civil Aviation Authority. This harmonization may help minimize costs for airplane and engine manufacturers and operators of affected equipment who seek certification to sell products globally.

Streamlining Certification

NORSEE

On March 31, 2016 the FAA published a new policy (PDF) to help aircraft owners voluntarily install safety equipment on airplanes and helicopters that is not required by the agency's regulations. It will reduce costs and streamline the installation of Non-Required Safety Enhancing Equipment (NORSEE) into the general aviation fleet.The policy is the result of collaboration under the GAJSC andexpands the 2014 FAA policy, which simplified the design approval requirements for a cockpit instrument called an angle of attack (AOA) indicator. AOA devices can be added to small planes to supplement airspeed indicators and stall warning systems, alerting pilots of a low airspeed condition before an aerodynamic stall occurs. Such stalls are particularly dangerous during takeoff and landing.

NORSEE includes avionics, electronic instruments, displays and mechanical equipment. Equipment approved as NORSEE increases overall situational awareness; provides additional information other than the aircraft primary system; provides independent warning, cautionary, or advisory indications; and provides additional occupant safety protection. Examples of NORSEE equipment include: traffic advisory systems, terrain awareness and warning systems; attitude indicators; fire extinguishing systems; and autopilot or stability augmentation systems.

The policy has the flexibility to accommodate the installation of new technology safety enhancements into Part 23, 27, and 29 aircraft that are determined to be a minor change to type design. The benefits must outweigh the risk. The policy will reduce equipment costs by allowing the applicants the flexibility to select industry standards that suit their product, as long as they meet the FAA's minimum design requirements. NORSEE approval under the policy is not an approval for installation on the aircraft - it just makes the equipment eligible for installation on the aircraft.

Angle of Attack Indicators

On February 5, 2014, the FAA took an important step to help improve safety in small aircraft by simplifying design and production approval requirements for an AOA indicator. AOA indicators provide the pilot with a visual aid to prevent loss of control of the aircraft in the critical phases of flight. Previously, cost and complexity of indicators limited their use to the military and commercial aircraft. Under new FAA guidelines, AOA devices can be added to small airplanes to supplement airspeed indicators and stall warning systems, giving pilots an additional tool to avoid a dangerous aerodynamic stall and subsequent loss of control.

Engagement & Outreach

Fly Safe

On June 6, 2015, the FAA and GA groups launched the Fly Safe national safety campaign to educate the GA community on how to prevent Loss of Control (LOC) accidents. An LOC accident involves an unintended departure of an aircraft from controlled flight. LOC can happen because the aircraft enters a flight regime that is outside its normal flight envelope and may quickly develop into a stall or spin. It can introduce an element of surprise for the pilot. LOC happens in all phases of flight. It can happen anywhere and at any time. There is one fatal accident involving LOC every four days. Join the campaign at #FlySafe and follow it on Facebook, Twitter, and Instagram.

Weather

Most weather-related accidents are fatal and a failure to recognize deteriorating weather continues to be a frequent cause or contributing factor of accidents. The GAJSC has produced several safety enhancements related to weather as part of their work on loss of control in flight. The 2014 FAA and industry's Got Weather? national safety outreach campaign reached approximately 4.5 million people.

Helicopter Safety

The FAA partners with the International Helicopter Safety Team (IHST) and the U.S. Helicopter Safety Team (USHST) to promote safety and reduce civil helicopter accidents and fatalities worldwide. The organization was formed in 2005 to lead a government and industry cooperative effort to address factors that were contributing to an unacceptable helicopter accident rate. Prior to 2006, the number of worldwide civil helicopter accidents was rising at a rate of 2.5 percent per year. Since 2006, the worldwide civil helicopter fleet has grown by 30 percent but the number of accidents has decreased in key global regions by 30 to 50 percent.

IHST members establish partnerships with countries with significant helicopter operations and encourage overseas industries to perform accident analysis and develop safety interventions. Partners include government and industry participants from the United States, Canada, Brazil, Mexico, New Zealand, India, Russia, and multiple countries in Europe, Central Asia, and the Middle East.

Since 2013, the USHST has focused on the U.S. commercial helicopter community and especially on fatal accidents. Comparing 2016 to 2013, the U.S. civil helicopter industry experienced a 36 percent accident rate reduction, from 4.95 accidents per 100,000 helicopter flight hours to 3.19 accidents per 100,000 helicopter flight hours. In addition, the number of fatal accidents has been cut nearly in half and the fatal accident rate is down 50 percent compared to 2013.

This year the USHST has been analyzing fatal accident reports and is developing proposed Safety Enhancements to be initiated by the industry and the FAA. The nearly two dozen Safety Enhancements focus on four key areas: Visibility/IMC, emergency situations, safety management and competency.

Total U.S. Accidents

2001-05 Baseline: 184 accidents, 29 fatal accidents, 55 fatalities

2013: 146 accidents, 30 fatal accidents, 62 fatalities

2014: 138 accidents, 21 fatal accidents, 37 fatalities

2015: 123 accidents, 17 fatal accidents, 28 fatalities

2016: 106 accidents, 17 fatal accidents, 29 fatalities

(42% decrease in accidents)

U.S. Accident Rate (per 100,000 flight hours)

2001-05 Baseline: 7.97 accident rate, 1.31 fatal accident rate, 2.45 fatality rate

2013: 4.95 accident rate, 1.02 fatal accident rate, 2.10 fatality rate

2014: 4.26 accident rate, 0.65 fatal accident rate, 1.14 fatality rate

2015: 3.67 accident rate, 0.52 fatal accident rate, 0.85 fatality rate

2016: 3.19 accident rate, 0.51 fatal accident rate, 0.87 fatality rate

(60% decrease in accident rate)

Online Resources

The FAASTeam's website is a good resource for pilots to help improve their skills and knowledge. The site hosts the FAA WINGS pilot proficiency program. It also contains online pilot training materials and includes courses to help a pilot avoid the pitfalls of VFR flight into Instrument Meteorological Conditions (IMC). Pilots, flight instructors, and mechanics are encouraged to register online.

Amateur-Built Aircraft

Amateur-built and other experimental aircraft were involved in almost 25 percent of U.S. fatal general aviation accidents over the past five years and account for an estimated five percent of total general aviation fleet hours. With the help of outreach, updated safety materials developed by the FAA and GAJSC industry participants, and new policies, this segment of the GA industry is showing improvement. Loss of control remains the leading cause of fatal accidents involving amateur-built aircraft. The FAA's Airmen Transition to Unfamiliar Airplanes Advisory Circular (AC 90-109A) helps plan the transition to any unfamiliar fixed-wing airplanes, including type-certificated and/or experimental airplanes. It provides information and guidance to owners and pilots of experimental, simple, complex, high-performance, and/or unfamiliar airplanes. It also provides information to flight instructors who teach in these airplanes.

The FAA also continues to promote AC 90-116, Additional Pilot Program (APP) for Phase I Flight Test. The AC provides information and guidance for flight testing experimental aircraft. The APP was developed to improve safety by enhancing Builder/Owner Pilot skills and mitigate risks associated with Phase I flight testing of aircraft built from commercially produced kits through the use of a qualified additional pilot and powerplant testing. The APP is an optional program that provides another pathway to conducting Phase I flight testing. The traditional option for pilots to test their aircraft solo during Phase I is not covered or affected by this AC, and remains an option for those who choose to do so in accordance with their aircraft's operating limitations.

Certificated Flight Instructors

The FAA has been working with the flight instructor community to improve GA safety through improved flight instructor training, most notably recurrent training.

Aviation Universities and Experts

Working through the Aviation Accreditation Board International and the University Aviation Association, the FAA is partnering with the aviation academic community to leverage their expertise and develop best practices for improving flight training.

Background

The General Aviation Accident Rate

While the number of fatal general aviation accidents over the last decade has decreased, so have the estimated total GA flight hours. This is likely due to economic factors.

From 2004 to 2009, fatal accidents from Controlled Flight Into Terrain have been reduced by approximately 50 percent.

However, until 2015, the general aviation fatal accident rate appeared to have remained relatively static based on the FAA's flight hour estimates. Since then, the fatal accident rate has decreased. The preliminary estimate for fiscal year (FY) 2016 is a fatal accident of 0.91 with 219 GA fatal accidents with 413 fatalities. In FY 2015, the fatal accident rate was 0.99 with 238 GA fatal accidents with 384 fatalities. In 2014, the fatal accident rate was 1.09 fatal accidents per 100,000 hours, with 252 fatal accidents. In 2013, the fatal accident rate was 1.11 fatal accidents per 100,000 hours, with 259 GA fatal accidents. In 2012, the fatal accident rate was 1.09 fatal accidents per 100,000 hours flown, with 267 GA fatal accidents. In 2011, the fatal accident rate was 1.12 fatal accidents per 100,000 hours flown, with 278 GA fatal accidents. In 2010, the fatal accident rate was 1.10 fatal accidents per 100,000 hours flown, with 272 GA fatal accidents.

Previous six-year GA fatal accident rates and numbers:

View table here: https://www.faa.gov/news/fact_sheets/news_story.cfm?newsId=21274

The Top 10 Leading Causes of Fatal General Aviation Accidents 2001-2013:

1. Loss of Control Inflight

2. Controlled Flight Into Terrain

3. System Component Failure - Powerplant

4. Fuel Related

5. Unknown or Undetermined

6. System Component Failure - Non-Powerplant

7. Unintended Flight in IMC

8. Midair Collisions Low

9. Altitude Operations

10. Other