Petition for Exemption From the Federal Motor Vehicle Theft Prevention Standard; Ford Motor Company
Federal Information & News Dispatch, Inc. |
SUMMARY: This document grants in full
DATES: The exemption granted by this notice is effective beginning with the 2015 model year (MY).
FOR FURTHER INFORMATION CONTACT: Ms.
SUPPLEMENTARY INFORMATION: In a petition dated
Under 49 CFR Part 543.5(a), a manufacturer may petition NHTSA to grant exemptions for one vehicle line per model year. In its petition, Ford provided a detailed description and diagram of the identity, design, and location of the components of the antitheft device for the Fiesta vehicle line. Ford stated that the Model Year (MY) 2015 Fiesta will be installed with a passive, electronic immobilizer device using encrypted transponder technology as standard equipment on the entire vehicle line. Ford also stated that depending on the trim level of the vehicle, the device would be equipped with either the SecuriLock Passive Anti-Theft Electronic Engine Immobilizer system (SecuriLock/PATS) or the Intelligent Access with Push Button Start (IAwPB) system on its Fiesta vehicle line. Specifically, Ford stated that the SecuriLock/PATS system will be installed as standard equipment on all Fiesta trim levels except the Titanium package that would instead be equipped with the IAwPB system as standard equipment. Along with Ford's passive immobilizer, key components of the SecuriLock/PATS antitheft system will include an electronic transponder key, powertrain control module (PCM), transceiver module ignition lock and cluster. Key components of the IAwPB system will include an electronic key fob, remote function actuator (RFA), Keyless Vehicle Module (KVM), powertrain control module and Ford's passive immobilizer. Ford further stated that its Titanium package will also be offered with a separate perimeter alarm system as standard equipment. The perimeter alarm system activates a visible and audible alarm if unauthorized access is attempted. Ford's submission is considered a complete petition as required by 49 CFR 543.7, in that it meets the general requirements contained in
Ford stated that when the ignition key is turned to the "Run/Start" position on the SecuriLock/PATS system or the "Start/Stop" button is pressed on the IAwPB system, the transceiver module reads the ignition key code and transmits an encrypted message from the keycode to the control module. Once the key is validated, starting of the engine is authorized by sending a separate encrypted message to the powertrain control module (PCM). Ford stated that the powertrain will function only if the keycode matches the unique identification keycode previously programmed into the cluster of the SecuriLock/PATS-equipped vehicles or the RFA in the IAwPB-equipped vehicles. In both systems, if the codes do not match, the vehicle will be inoperable. Ford stated that in both systems, an electronic key will be programmed into the vehicle during system initialization performed at the manufacturing plant. With the IAwPB system, Ford stated that if the programmed key is not present in the vehicle, the engine will not start. Additionally, Ford further stated that the powertrain will function only if the keycode matches the unique identification keycode previously programmed into the Cluster/RFA. Ford also pointed out that in addition to the programmed key, there are three modules that must be matched together in order to start the vehicle, adding an additional level of security to both systems. Specifically, Ford stated that both the SecuriLock/PATS and IAwPB systems' Cluster/RFA and PCM respectively share security data that during vehicle assembly form matched modules that if separated from each other will not function in other vehicles.
In addressing the specific content requirements of 543.6, Ford provided information on the reliability and durability of its proposed device. To ensure reliability and durability of the device, Ford conducted tests based on its own specified standards. Ford provided a detailed list of the tests conducted and believes that the device is reliable and durable since the device complied with its own specified requirements for each test.
Ford stated that its MY 2015 Fiesta vehicle line will also be equipped with several other standard antitheft features common to Ford vehicles, (i.e., hood release located inside the vehicle, counterfeit resistant VIN labels, secondary VINs and secured cabin accessibility). Ford also stated that incorporation of several other features in both systems further support reliability and durability of the device. Specifically, some of those features include: Encrypted communication between the transponder and the control function (Cluster/RFA module) and the PCM; numerous code combinations making key duplication virtually impossible; inability to mechanically override the device to start the vehicle; and any attempt to slam-pull the ignition lock cylinder or short the "Start/Stop" button will have no effect on an intruder's ability to start the vehicle without the correct code being transmitted to the electronic control modules.
Ford compared the device proposed for its vehicle line with other devices which NHTSA has determined to be as effective in reducing and deterring motor vehicle theft as would compliance with the parts-marking requirements. Ford stated that it believes that the standard installation of either the SecuriLock/PATS system or the IAwPB system would be an effective deterrent against vehicle theft.
Ford stated that the SecuriLock/PATS system was introduced as standard equipment on all of its MY 1996 Ford Mustang GT, Cobra and other selected models. Ford also stated that in MY 1997, the SecuriLock/PATS system was extended to the complete Ford Mustang vehicle line as standard equipment. Ford further stated that according to the
Ford also reported that beginning with MY 2010, the SecuriLock system was installed as standard equipment on all of its North American Ford, Lincoln and Mercury vehicles but was offered as optional equipment on its 2010 F-series Super Duty pickups, Econoline and Transit Connect vehicles. Ford further stated that beginning with MY 2010, the IAwPB system was installed as standard equipment on the Lincoln MKT vehicles and offered as standard equipment on the Lincoln MKX and optionally on the Lincoln MKS, Taurus, Edge, Explorer and the Focus vehicles beginning with MY 2011. Starting with 2013, the IAwPB has been offered as standard equipment on the Lincoln MKZ and as optional equipment on the Ford Fusion, C-Max and Escape vehicles.
Ford stated that both antitheft systems with a standard equipment immobilizer are of the same design and performance as that of the MY 2006 Ford Focus vehicle line. Ford was granted an exemption for the Focus vehicle line on
The agency agrees that the device is substantially similar to devices installed on other vehicle lines for which the agency has already granted exemptions.
Pursuant to 49 U.S.C. 33106 and 49 CFR 543.7(b), the agency grants a petition for exemption from the parts-marking requirements of Part 541 either in whole or in part, if it determines that, based upon substantial evidence, the standard equipment antitheft device is likely to be as effective in reducing and deterring motor vehicle theft as compliance with the parts-marking requirements of Part 541. The agency finds that Ford has provided adequate reasons for its belief that the antitheft device for the Ford Fiesta vehicle line is likely to be as effective in reducing and deterring motor vehicle theft as compliance with the parts-marking requirements of the Theft Prevention Standard (49 CFR Part 541). This conclusion is based on the information Ford provided about its device.
--This is a summary of a
Grant of petition for exemption.
Citation: "79 FR 18410"
Federal Register Page Number: "18410"
"Notices"
Copyright: | (c) 2014 Federal Information & News Dispatch, Inc. |
Wordcount: | 1606 |
Department of Defense Personnel Security Program (PSP)
Advisor News
Annuity News
Health/Employee Benefits News
Life Insurance News